EPSON Stylus Color / Pro

1. Seal the outlet hole(s) in the base of the cartridge with adhesive tape.
2. Peel back the bottom of the sticky label to reveal the sealed filling hole(s).
3. Assemble the syringe and filling needle and fill with the appropriate colour ink.
4. Puncture the seal to the filling hole with the filling needle. (See diagram for filling hole colour). Insert the filling needle half an inch (12.5mm) into the cartridge.

   Note: The cartridge contains sponge and a slight resistance might be felt.

5. Slowly inject up to 15ml. of ink or until ink appears at the filling hole.
6. Seal the filling hole with some adhesive tape.
7. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use, or use with a different colour ink.
8. Mount the cartridge in the printer and allow to stand for up to 24 hours. (Allows ink to flow to the print head).

   NOTE: If cartridge is refilled before it is empty this time is greatly reduced.

9. Mount the cartridge and run a priming cycle as per printer instructions.

Back to Refill Instruction Index