BROTHER HC-2500, HS-5000/5300, MFC 7000 (LC01BK, LC01C, LC01M, LC01Y)

br2500.gif (9465 bytes)

  1. Make a 3mm filling hole in the top of the cartridge, using a small drill, in the position shown.
  2. Assemble the syringe and filling needle and fill with the correct colour ink.
  3. Slowly inject ink up to 7ml. of ink into the centre of the sponge inside..
  4. Seal the filling hole with the plug provided, or strong adhesive tape.
  5. Clean the syringe with water and dry before refilling with another colour.
  6. Install the cartridge and run a priming cycle as per printer instructions.

Back to Refill Instruction Index