CANON BJC30/50/70

  1. Peel back the sticky label to reveal the filling hole. (See diagram)
  2. Assemble the syringe and filling needle and fill with ink.
  3. Insert the syringe through the filling hole, and push into the centre of the cartridge. (Enlarge filling hole if necessary with screw provided)

    Note: The cartridge contains sponge and a slight resistance may be felt.

  4. Slowly inject up to 7ml. of ink or until ink appears at the filling hole.
  5. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use, or use with a different colour ink.
  6. Mount the cartridge and run a priming cycle as per printer instructions.

CANON BJC50/70/80

cbjc50.gif (21514 bytes)

The procedure is as above except the syringe must not be inserted more than 6mm into the black cartridge, as the gauze to the outlet hole may be damaged.

Be careful to inject the correct colour ink. Clean the syringe with water and dry before use with a different colour ink.

Back to Refill Instruction Index